Members Lone Flanger Posted June 1, 2006 Members Share Posted June 1, 2006 I've got a Melos echo unit here, the board inside of it is marked EM-120. I believe this is similar to the Univox EC-80a. It'll pass a signal from my guitar but when I rotate the Echo Balance knob (basically the blend control), I get no delay from the unit. I've gone over the connections to all the pots and some solder joints that looked suspect along with cleaning the tape heads and going over the controls with some Deoxit and it's still not working. Does anyone have any idea what's going on with this thing and if so how I could fix it. If I can't fix it myself (which I'd really like to do), is there any place that would be good to send it to that won't rip a hole in my wallet and make this unit not cost effective to fix? Thanks! Link to comment Share on other sites More sharing options...
Members Lone Flanger Posted June 1, 2006 Author Members Share Posted June 1, 2006 bump. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.