Members pktaskes Posted June 7, 2006 Members Share Posted June 7, 2006 I find my pedals keep losing thier velcro strips. I tried hot gluing them but to no avail. Double-sided tape didn't work either (it was kinda thin I thought). Again - it's the strips that adhere to the back of the effects, not the strips to the carpet - they are on there like glue. What's super sticky that I could use? Link to comment Share on other sites More sharing options...
Members Narcosynthesis Posted June 7, 2006 Members Share Posted June 7, 2006 try taking out hte screws that hold on the base of the pedal, putting on the velcro and screwing the base back on through the velcro on the bottom of the pedal David Link to comment Share on other sites More sharing options...
Members C-4 Posted June 7, 2006 Members Share Posted June 7, 2006 Get in touch with Rooster at Trailer Trash Pedalboards and order some of the touring velcro. It definitely won't come off! Link to comment Share on other sites More sharing options...
Members FLYING V 83 Posted June 7, 2006 Members Share Posted June 7, 2006 Crazy Glue works fine. It'll never come off. Link to comment Share on other sites More sharing options...
Members halcyon360 Posted June 7, 2006 Members Share Posted June 7, 2006 I had the same problem with my digi delay. I tried everything, industrial velcro with super 77 spray glue, gorrilla glue. Finally I just riped the rubber pad off the bottom of the pedal and stuck the velcto on the bare metal bottom, never had a problem since. Maybe it was a bad batch of rubber bottoms. Link to comment Share on other sites More sharing options...
Members pktaskes Posted June 7, 2006 Author Members Share Posted June 7, 2006 Originally posted by C-4 Get in touch with Rooster at Trailer Trash Pedalboards and order some of the touring velcro. It definitely won't come off! how? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.