Members chu2 Posted July 3, 2006 Members Share Posted July 3, 2006 I built an LPB clone tonight from the Tonepad Schematic, and had some trouble. First, I couldn't get the LED to light. Then, I flipped the MBP FET around, since there was no source or drain leads specified. The LED lit, but now I can't get the effect to come on AND the LED only stays dimly lit constantly, no matter what the effect is switched. LPB-1 schematic, according to Tonepad Anyone have this problem or know what might be causing it? Thanks. Link to comment Share on other sites More sharing options...
Members shawnc Posted July 3, 2006 Members Share Posted July 3, 2006 Had a similar problem with another effect I was building, ended going with the 3pdt true bypass option instead, the Millenium bypass is kinda flakey. Cheers Link to comment Share on other sites More sharing options...
Members chu2 Posted July 3, 2006 Author Members Share Posted July 3, 2006 thanks. I'm thinking I'm just going to omit the Millenium Bypass and LED altogether for the time being, until I can figure out what went wrong. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.