Members Happy_Thom Posted February 1, 2007 Members Share Posted February 1, 2007 Ok my amp won't change channels with or without the footswitch it jsut stays on the clean channel. I asked over on the amp forum and someone was sying some big resistor has burn itself out or a tube is loose or fried. What do you guys think? Either way I'm gonna open it up and have my dad have alook at it, anybody know where I can get a schematic for it? Cheers! Link to comment Share on other sites More sharing options...
Members 88mm Posted February 1, 2007 Members Share Posted February 1, 2007 I have the AOR Pro Tube 50. I emailed Laney and the sent me a schematic. But I think its for the 100watt. I can email it to you if you would like. Link to comment Share on other sites More sharing options...
Members Happy_Thom Posted February 1, 2007 Author Members Share Posted February 1, 2007 yes please that'd be great, mine is the 50 watt mark 2 version if that matters? I could jsut e-mail laney myself if it's going to be significantly different but if not thanks a lot! Link to comment Share on other sites More sharing options...
Members 88mm Posted February 1, 2007 Members Share Posted February 1, 2007 I would email Laney first. Give them your model and year. That should work best. If they are no help I would be glad to send you mine. Link to comment Share on other sites More sharing options...
Members NiCkMiLnE Posted February 1, 2007 Members Share Posted February 1, 2007 i have a series II 100w with no problems? contact dave lundt in manchester. thats how i use tech wise, cheap with great service. shoot me a PM and ill send you his number tomorow mate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.