Members Peekaboo Fuzzy Posted February 1, 2007 Members Share Posted February 1, 2007 I was wondering if I can plug two different amps into the 2290? The first amp will most likely be a Roland JC 120 (effects loop send). The second amp, a Marshall JMP head. The speaker out of the JMP will be plugged into a dummy load box and the outs of the dummy load into the 2290 at line level. How can I do this so I am using the 2290 for both amps at once? In other words, I would have a basic chorus+delay sound coloring both of these amps at once. Can I do this or do I need a separate processor for each amp? Also the dummy load has a stereo out and I tried to look at a pic of the back pannel of the 2290 and didn't see any left and right ins. Can I still plug a stereo source into the 2290? Thanks! Link to comment Share on other sites More sharing options...
Members Peekaboo Fuzzy Posted February 1, 2007 Author Members Share Posted February 1, 2007 bump Link to comment Share on other sites More sharing options...
Members gorebuc Posted February 1, 2007 Members Share Posted February 1, 2007 google U2 sound forums; those guys have all the TC delay info Link to comment Share on other sites More sharing options...
Members Peekaboo Fuzzy Posted February 2, 2007 Author Members Share Posted February 2, 2007 Thanks gorebuc. I tried that, but there are mostly non technical questions about the band on there. Anyone? Link to comment Share on other sites More sharing options...
Members Peekaboo Fuzzy Posted February 3, 2007 Author Members Share Posted February 3, 2007 Anyone else who might be able to offer some tips on this unit? Link to comment Share on other sites More sharing options...
Members andreas Posted February 3, 2007 Members Share Posted February 3, 2007 Does it have stereo inputs and outputs? If so, it might work, depending on how it handles the incoming signal. Many stereo-stereo units will sum both inputs to feed a single delay circuit, in which case you'll be "tainting" the signal (delayed signal from amp 1 bleeding into amp 2's fx return, and vice versa). Ideally you'd want to have separate delay circuits for left and right channels, respectively, but that's a really rare thing. If the 2290 has a single mono input, it can't be done. /Andreas Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.