Members 89strat Posted February 2, 2007 Members Share Posted February 2, 2007 The push pull tone knob on this is a great feature. However, I always keep it in the up position and then step on it everytime I step on the pedal above it on my board. Does anybody know how I can modify this so that the push pull works in reverse so that I can just keep the tone knob in the down or push position? Ideally, I would prefer this switch to be seperate on the side or something, but just reversing the switch function would serve me best at this moment. Link to comment Share on other sites More sharing options...
Members alteredsounds Posted February 2, 2007 Members Share Posted February 2, 2007 I would presume that its a dual-gang pot? If so, reverse the wiring of the 2 pots (ie. top row with bottom row). Link to comment Share on other sites More sharing options...
Members 89strat Posted February 3, 2007 Author Members Share Posted February 3, 2007 I would presume that its a dual-gang pot? If so, reverse the wiring of the 2 pots (ie. top row with bottom row). It's not that kind of pot. It's like a typical push pull with what appears to be a small box with six posts or legs. Link to comment Share on other sites More sharing options...
Members The Friendly Ranger Posted February 3, 2007 Members Share Posted February 3, 2007 If you don't mind having it in the up position all the time and not being able to push it down, you can put an o-ring under the knob. Link to comment Share on other sites More sharing options...
Members The Friendly Ranger Posted February 3, 2007 Members Share Posted February 3, 2007 Or you could fix an o-ring or something similar so that you can pull it out at will rather than having it as a permanent fixture around the shaft. Just something stuck under the edge to keep it from being pushed down should do the trick I would think. Link to comment Share on other sites More sharing options...
Members 89strat Posted February 3, 2007 Author Members Share Posted February 3, 2007 Or you could fix an o-ring or something similar so that you can pull it out at will rather than having it as a permanent fixture around the shaft. Just something stuck under the edge to keep it from being pushed down should do the trick I would think. I was thinking that also. I was also thinking that a great mod for this would be to have it work on a seperate foot switch with a little jump in volume added. There's a slight volume increase now, but not much. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.