Members missing_dave Posted February 5, 2007 Members Share Posted February 5, 2007 hey everyone new here, big fan. anyway im rehousing a tube screamer in a new enclosure and had a few questions:the DC jack on the original is soldered on the pc board? im adding a DC jack bezel if i unsolder the original what wire goes where? its not like an led and i cant risk trail and error with live power? looking for some wiring for a dpt switch as well...specific to this project (as there are tones online) what two lugs on the new switch(fulltone 9 lug) do the original two wires go to?thanks for reading ! BTW if anyone is getting into this stuff or modding, or your ts9 wont turn on? etc. drop me email.. ive become pretty invloved with them and maybe can save you some time i had to spend:thu: Link to comment Share on other sites More sharing options...
Members comfortablynumb Posted February 5, 2007 Members Share Posted February 5, 2007 If you don't want to true bypass your TS9, I don't think that switch will work. It's mechanical and will not turn your TS9 on and off. It just just has two wires going to the original switch? You probably need one of these.. http://www.smallbearelec.com/Detail.bok?no=26 You just transfer the two wires to the new switch. I rehoused my DS-1 and used one. Turned out great. This is an old picture. It now has a blue check LED and a red LED under the toggle. Welcome to the forums, by the way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.