Members mueller Posted February 7, 2007 Members Share Posted February 7, 2007 I tried doing the true-bypass mod to my crybaby. I removed these buffer components: and I think I wired everything up to the switch right. It bypasses correctly, no problem there. When I try to activate the wah it switches, but you can't sweep it. No matter if you have the heal or toe down, it sounds the same (it's like wah, you just can't sweep it). Any ideas? If you need more info, just ask Link to comment Share on other sites More sharing options...
Members Turd Furgison Posted February 7, 2007 Members Share Posted February 7, 2007 hey man don't worry you didn't {censored} it up (well probably not) you have to adjust the pot's throw position. Just take that little toothed plastic piece that is attached to the foot control and slide it back from the pot, and rotate the pot arm manually until it starts to hit the sweep range. that should do it. Link to comment Share on other sites More sharing options...
Members Gearhunter Posted February 7, 2007 Members Share Posted February 7, 2007 Did you put that wire from the footswitch to the board where the buffer parts were removed? Link to comment Share on other sites More sharing options...
Members mueller Posted February 7, 2007 Author Members Share Posted February 7, 2007 hey man don't worry you didn't {censored} it up (well probably not) you have to adjust the pot's throw position. Just take that little toothed plastic piece that is attached to the foot control and slide it back from the pot, and rotate the pot arm manually until it starts to hit the sweep range. that should do it. D'oh! This was it...man I feel stupid. Not sure why I didn't try that earlier.Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.