Members FearTheVoices Posted March 10, 2007 Members Share Posted March 10, 2007 Dod 401 Phaser Ross Phaser Morley PWB(power wah boost) Ernie Ball Volume Pedal Boss SD-1 Boss CE-2 Boss DD-20 Right now I have it like this Effects loop Send - Chorus - Delay - Return In front I dont have my volume pedal or two phasers hooked up do to lack of cables(George L kit coming in next week ) so i will need to know the best placement of those. Right now its Amp -->Morley Wah -->SD-1--> Guitar When adding the other three I was thinking like this. Amp-->Phaser1-->Phaser2-->Morley Wah-->Volume Pedal -->SD1-->Guitar Hows that look to you guys? Link to comment Share on other sites More sharing options...
Members dwerlin Posted March 10, 2007 Members Share Posted March 10, 2007 if it were me, i'd probably go: guitar -> volume pedal -> wah -> phaser 1 -> SD-1 -> phaser 2 -> amp Link to comment Share on other sites More sharing options...
Members ScreamCage Posted March 10, 2007 Members Share Posted March 10, 2007 if it were me, i'd probably go:guitar -> volume pedal -> wah -> phaser 1 -> SD-1 -> phaser 2 -> amp Yeah, but that'd be redundant. At least put the volume post gain. Link to comment Share on other sites More sharing options...
Members Inertiatic_SKS Posted March 11, 2007 Members Share Posted March 11, 2007 If it were me, I'd go guitar -> wah -> SD-1-> phaser 1 -> phaser 2 -> CE-2 -> DD-20 -> volume pedal The volume pedal will be able to control the gain sufficiently post-dirt and the DD-20 will have a lot more presence, sound fuller and just have an over-all better sound at the end of the chain. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.