Jump to content

making a footswitch.


only_shallow

Recommended Posts

  • Members

it's really easy:

you just need a momentary/'push-to-make' switch like this

n92ap.jpg
http://www.maplin.co.uk/module.aspx?ModuleNo=34489&doy=30m8

plus a jack socket and 2 bits of wire.

attach one piece of wire to one lug on the switch and to the Tip of the Jack,
then attach the other wire to the other lug and the Sleeve of the jack.

=

Done :thu:

you could easily substitute another momentary switch for the one above; SPDT, DPDT etc

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...