Jump to content

Z Hard on....


doodie!

Recommended Posts

  • Members

This should help. (from Beavis Audio)

StompboxWiring_SwitchcraftJacks.gif

Ignore the set of lugs on the left-most side of the 3PDT switch. It's there for the LED, which you won't have in your clone. As for the PayPal monies, ask DanO from Beavis Audio if you can contribute towards maintaning his site. You can also donate $$ to the "Mom's Against the Theft of Intellectual Property" (MAtToIP) if DanO declines your donation.


c

Link to comment
Share on other sites

  • Members

If yo don't have a DC jack, connect the red wire from the battery clip to the "power" hole in your PCB. Connect the black wire into the ring connector on the stereo jack (which is your input). The sleeve tab on your input should be connected to the left top lug (middle on the pic) of your DPDT switch.

Out of curiosity, how much did you pay for the clone kit?

c

Link to comment
Share on other sites

  • Members

ok, I got it all together and when i engage it, it kills about 95% of the volume. I've tried different batteries.when I turn it off, it bypasses perfectly. any suggestions?

 

 

Yes,

 

If you have this much trouble building pedals, dont try.

 

You're welcome.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...