Members Saturnine10 Posted March 1, 2008 Members Share Posted March 1, 2008 Just got done wiring up my bypass loop boxes, I still have one left to make... Tomorrow I'm going to wire up everything with George L cables, I got a smoking deal on a bunch of it at a local guitar shop today!! Basically all I added was 3 bypass loop pedals (only 2 showing) along with a rehoused channel selector switch (The orange box) plus I'm going to patch in my rack delays (finally!) Here's a "before" Pic of my board: And what it looks like now (not wired up yet) Here are the Bypass loop boxes i made.. I'm going label them each differently with vinyl stickers that say "Wet" "Looper" "Delay".. Then my rehoused amp channel selector box is going to say "Dirt" Sooo.. Thats all for now.. Link to comment Share on other sites More sharing options...
Members PurpleStrat Posted March 1, 2008 Members Share Posted March 1, 2008 Link to comment Share on other sites More sharing options...
Members Flying_Milkman Posted March 1, 2008 Members Share Posted March 1, 2008 Excellent job on the bypass boxes. Looks great! Link to comment Share on other sites More sharing options...
Members IRG Posted March 1, 2008 Members Share Posted March 1, 2008 Looks great, I like it a lot. Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 1, 2008 Author Members Share Posted March 1, 2008 Sweet, thanks! I have some other goodies coming in the mail, should be a fun little project thats going to have fuzzy results Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 1, 2008 Author Members Share Posted March 1, 2008 Here are pics of the bypass loop pedal's guts and wiring.. Fairly simple and yet effective! Wired up.. (I had to change a wire after i took this pic) Link to comment Share on other sites More sharing options...
Members deovinde11 Posted March 1, 2008 Members Share Posted March 1, 2008 dang was that easy to make? I need one Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 2, 2008 Author Members Share Posted March 2, 2008 Yea, it wasnt hard at all. Each pedal took a few tries to get all the wiring sorted out, but nothing was "hard".. If anything, the hardest part is making everything look good.. Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 2, 2008 Author Members Share Posted March 2, 2008 Here's my pedal board all wired up.. I think it came out really nice!! Everything is working just fine with the exception of my amp channel pedal.. I'm not really sure whats going on with that, but it was working last night.. :poke: The I was most impressed with the George L patch cables, they turned out alot nicer than i thought they would. Putting those all together took a while, but that was because i was figuring out what was the best signal path for all my pedals.. I'm going to do a diagram of my layout later tonight.. Here's a few pics! Overview of my board: Overview of all my gear: Link to comment Share on other sites More sharing options...
Members deovinde11 Posted March 2, 2008 Members Share Posted March 2, 2008 Where did you buy parts for the bypass boxes? and if its not to much trouble do you think you could tell me what you used? Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 2, 2008 Author Members Share Posted March 2, 2008 I got everything at parts pedal plus.. You need.. LED+Holder w/ 1k resistor4 mono jacks1 3dpt switch9v adaptorEnclosure of choiceWire (of course!) Thats it. Link to comment Share on other sites More sharing options...
Members deovinde11 Posted March 2, 2008 Members Share Posted March 2, 2008 sounds really cheap I like it. would it be the same wiring for a bigger enclosure with 2 or 3 loops? or is that more complicated Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 2, 2008 Author Members Share Posted March 2, 2008 Yea, it would be a little more difficult but there are diagrams out there for them. These were the first ones i ever built, so i wanted to make them as easy as possible. Maybe in the future i'll just have one box that houses all 3 loop switches, that would be ideal if i were to get more pedals. Link to comment Share on other sites More sharing options...
Members Clorox Posted March 2, 2008 Members Share Posted March 2, 2008 Very colorful. Nice job! Link to comment Share on other sites More sharing options...
Members rossowj Posted March 2, 2008 Members Share Posted March 2, 2008 looks great Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted March 2, 2008 Author Members Share Posted March 2, 2008 I dont know what i'm going to do if i get a DMM or a Pog.. Then i get to do this all over again!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.