Members tubezipper Posted March 5, 2008 Members Share Posted March 5, 2008 Huge volume drop when i turn it on? any advice? Link to comment Share on other sites More sharing options...
Members hbar Posted March 5, 2008 Members Share Posted March 5, 2008 Bend over and I'll show you. Link to comment Share on other sites More sharing options...
Members blackjack davey Posted March 5, 2008 Members Share Posted March 5, 2008 Play with the trim pot underneath it. It usually requires some tweaking depending if you're using singles or humbuckers. Otherwise, I would place it earlier in the chain before dirt for maximum impact.. Link to comment Share on other sites More sharing options...
Members jorhay1 Posted March 5, 2008 Members Share Posted March 5, 2008 12345 A StreetMy TownLand, Planet Earth 90444 attn:jorhay1 Link to comment Share on other sites More sharing options...
Members tubezipper Posted March 5, 2008 Author Members Share Posted March 5, 2008 Play with the trim pot underneath it. It usually requires some tweaking depending if you're using singles or humbuckers. Otherwise, I would place it earlier in the chain before dirt for maximum impact.. Where is it located? Link to comment Share on other sites More sharing options...
Members tubezipper Posted March 5, 2008 Author Members Share Posted March 5, 2008 Also this has been traveling around the box. Link to comment Share on other sites More sharing options...
Members SonicVI Posted March 5, 2008 Members Share Posted March 5, 2008 You have a screw missing there in the upper left corner of the pcb. Link to comment Share on other sites More sharing options...
Members tubezipper Posted March 5, 2008 Author Members Share Posted March 5, 2008 You have a screw missing there in the upper left corner of the pcb. No its with all the other screws. Link to comment Share on other sites More sharing options...
Members denimboy Posted March 5, 2008 Members Share Posted March 5, 2008 Theres is a whole underneath the casing so you don't have to open it up.. Looks like you got an older model or something cause I can't see it . Link to comment Share on other sites More sharing options...
Members blackjack davey Posted March 5, 2008 Members Share Posted March 5, 2008 When the pedal's all in one piece there should be a tiny hole on the bottom of the sheet metal. Insert an eyeglass screwdriver and turn either CW or CCW until the Volume drop goes away. Repeat as necessary. Link to comment Share on other sites More sharing options...
Members Tommy Horchata Posted March 5, 2008 Members Share Posted March 5, 2008 I'd place it first in your chain Link to comment Share on other sites More sharing options...
Members willhaven Posted March 5, 2008 Members Share Posted March 5, 2008 Anything with an octave or pitch shift function I'd put early in the chain myself. Link to comment Share on other sites More sharing options...
Members Woody777 Posted March 5, 2008 Members Share Posted March 5, 2008 +1 to early placement... mine goes right after tuner. And you should be able to dial out the volume pot by tweaking the trimpot, which other have said. There's a manual that explains it at the EHX site. Link to comment Share on other sites More sharing options...
Members Fender&EHX4ever Posted March 5, 2008 Members Share Posted March 5, 2008 I don't think the 3pdt is wired correctly. Unfortunately, I don't have the diagram on me right now, but maybe this evening. Link to comment Share on other sites More sharing options...
Members tubezipper Posted March 5, 2008 Author Members Share Posted March 5, 2008 And this also happened. Where does the purple wire go? Link to comment Share on other sites More sharing options...
Members tubezipper Posted March 5, 2008 Author Members Share Posted March 5, 2008 Yes mine has a hole. so should i screw that? Thanks people:thu: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.