Jump to content

What pedals for a Ritchie Blackmore sound??


MakisSRV

Recommended Posts

  • Members

from wiki

 

 

 

"Blackmore frequently used effects during his time with Deep Purple and Rainbow, (despite claims to the opposite). He used a Hornby Skewes Treble Booster in the early days. Around the time of the Burn sessions he experimented with an EMS Synthi Hi Fli guitar synthesizer. He would sometimes use a wah-wah pedal and a variable control treble-booster for sustain. Moog "Taurus" bass pedals were used during solo parts of concerts. He also had a modified Aiwa TP-1011 tape machine built to supply echo and delay effects. The tape deck was also used as a pre-amp. Other effects that Blackmore used were a Schulte Compact Phasing A, a Unicord Univibe, and an Octave Divider. In the mid 80s he also experimented with Roland guitar synths. A Roland GR-700 was seen on stage as late as 1995-96, later replaced with the GR-50. Guitar synths are also used quite a bit in Blackmore's Night. As an example, Blackmore plays with a slide over what is probably an organ patch in the beginning of Way to Mandalay. Guitar synths are also extensively used live, as they prevent feedback problems.

 

His amplifers were originally 200W Marshall Major stacks which were modified by Marshall with an additional output stage (generated approximately 278W) to make them sound more like Blackmore's favourite Vox AC-30 amp, cranked to full volume. Since 1994 he has used Engl valve amps. He has cited that one of his reasons was that his Marshall heads did not sound as good as the Engls at low volume."

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...