Members TheGareth Posted March 17, 2008 Members Share Posted March 17, 2008 I'm powering a Line 6 Verbzilla from a Skytronic AC Adapter that is rated at 300 mA. Can I hook up another pedal in a daisychain fashion or would that burn out the adapter? I was thinking of getting the Behringer Rotary Machine, which is the same as the Line 6 Roto Machine I think. The Behringer pedal draws 60mA and the Line 6 Verbzilla draws 60mA too. I should be OK with a 300 mA adapter, right? Link to comment Share on other sites More sharing options...
Members Kayzer Posted March 17, 2008 Members Share Posted March 17, 2008 60mA + 60mA = 120mA...you should be able to add even more pedals until you reach 300mA My diago Powerstation has 3000mA and i use around 2000mA with 14 Pedals right now... Link to comment Share on other sites More sharing options...
Members TheGareth Posted March 17, 2008 Author Members Share Posted March 17, 2008 60mA + 60mA = 120mA ...you should be able to add even more pedals until you reach 300mA My diago Powerstation has 3000mA and i use around 2000mA with 14 Pedals right now... Thanks, I just wanted to check. That Diago Powerstation looks pretty good. Link to comment Share on other sites More sharing options...
Members Kayzer Posted March 17, 2008 Members Share Posted March 17, 2008 Yes it is easy and clean! hope it will last for long! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.