Members extremelybored Posted March 20, 2008 Members Share Posted March 20, 2008 So I just got a flatliner with all the leads I need to power my pedals, trouble is the barrels are all the standard 5.5mm x 2.1mm which don't fit into my whammy or my DMM... Do converters exist or do I need to break out the soldering iron and bodge/cannibalise my existing supplies? Link to comment Share on other sites More sharing options...
Members TomCTC Posted March 20, 2008 Members Share Posted March 20, 2008 Check the Burkey site? Link to comment Share on other sites More sharing options...
Members andreas Posted March 20, 2008 Members Share Posted March 20, 2008 http://www.burkey.nl/shop.htm Look for the SC-AF25 (a 2.1mm female jack -> 2.5mm male plug) - that should work for the Whammy. Link to comment Share on other sites More sharing options...
Members TomCTC Posted March 20, 2008 Members Share Posted March 20, 2008 Hey, on a side note... how much are these Flatliner things in North America? Link to comment Share on other sites More sharing options...
Members extremelybored Posted March 20, 2008 Author Members Share Posted March 20, 2008 http://www.burkey.nl/shop.htmLook for the SC-AF25 (a 2.1mm female jack -> 2.5mm male plug) - that should work for the Whammy. Cheers, for that - any clues on the DMM? I suppose I should really measure the barrel.... Link to comment Share on other sites More sharing options...
Members andreas Posted March 20, 2008 Members Share Posted March 20, 2008 If the regular cables don't fit, even though the plug more or less looks identical to the one on the E-H power supply, it's most likely a 2.5mm center pin jack. The outside dimension is the same, it's just the center pin that is a hair (0.4mm) thicker. /Andreas Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.