Members tonedover Posted April 3, 2008 Members Share Posted April 3, 2008 got me a rat infestation (finally) Thanks for the good transaction dacama this is obviously a Rat2, but at least the tag says made in the USA. Maybe someday this will get the "good" chip installed -- i need to get better at soldering first heres also a thumbnail of my new set up.... had to do some fancy arranging to make it all fit snug, so it looks out of order, but here is how they are attachedtu2 - evh90 - bf3 -bd-2 - rat2 - big muff - small clone - digidelay - bad monkey.... the monkey is getting borrowed by 88mm this weekend and I have an rc-2 in the mail on its way to me to take the last spot! another npd coming up!! Link to comment Share on other sites More sharing options...
Members Fatso Forgottso Posted April 3, 2008 Members Share Posted April 3, 2008 nice, simple, basic board.would spank. Link to comment Share on other sites More sharing options...
Members mrweems Posted April 3, 2008 Members Share Posted April 3, 2008 Welcome to the club! Link to comment Share on other sites More sharing options...
Members thezeng Posted April 3, 2008 Members Share Posted April 3, 2008 hmmm bf-3.. hows the ultra on it?if i look at that board it looks like my old board from a year ago! how things change. =/ Link to comment Share on other sites More sharing options...
Members TomCTC Posted April 3, 2008 Members Share Posted April 3, 2008 CongRATs! Link to comment Share on other sites More sharing options...
Members 88mm Posted April 14, 2008 Members Share Posted April 14, 2008 Sooo.... How ya like it? Link to comment Share on other sites More sharing options...
Members pbone Posted April 14, 2008 Members Share Posted April 14, 2008 Link to comment Share on other sites More sharing options...
Members Jakkeh Posted April 14, 2008 Members Share Posted April 14, 2008 Aren't IC's just plug and ply affairs? I've switched IC's in a few pedals and it's just been a case of gentle pulling and pushing and a little bit of lovi-.. I.. Hello Link to comment Share on other sites More sharing options...
Members kismet78 Posted April 14, 2008 Members Share Posted April 14, 2008 Aren't IC's just plug and ply affairs? I've switched IC's in a few pedals and it's just been a case of gentle pulling and pushing and a little bit of lovi-.. I.. Hello Only if they've been socketed. Rats don't have socketed IC's stock. Link to comment Share on other sites More sharing options...
Members TomCTC Posted April 14, 2008 Members Share Posted April 14, 2008 I have a large-box LM308 Rat on the way. I'm pumped. Link to comment Share on other sites More sharing options...
Members MathiasWilliam Posted April 15, 2008 Members Share Posted April 15, 2008 s!:badump:boodoom Pish! Link to comment Share on other sites More sharing options...
Members dacama Posted April 15, 2008 Members Share Posted April 15, 2008 got me a rat infestation (finally) Thanks for the good transaction dacama this is obviously a Rat2, but at least the tag says made in the USA. Maybe someday this will get the "good" chip installed -- i need to get better at soldering first heres also a thumbnail of my new set up.... had to do some fancy arranging to make it all fit snug, so it looks out of order, but here is how they are attached tu2 - evh90 - bf3 -bd-2 - rat2 - big muff - small clone - digidelay - bad monkey.... the monkey is getting borrowed by 88mm this weekend and I have an rc-2 in the mail on its way to me to take the last spot! another npd coming up!! Hey man glad you're enjoying the rat :thu:because it's set to detonate in 3 hours Link to comment Share on other sites More sharing options...
Members tonedover Posted April 15, 2008 Author Members Share Posted April 15, 2008 Sooo.... How ya like it? i really like it a lot.... wish the "missing" keeley bd-2 was here to run into it.... BUT i digress... It can be very transparent-ish, and then goes to pretty aggressive. from 3 oclock to full though i cant hear any increase in gain. maybe im not playing loud enough to tell ?? anyways a solid purchase. really suits my power chord tendencies!! I do need a diffeent screw to hold in the battery cover though.... Link to comment Share on other sites More sharing options...
Members tonedover Posted April 15, 2008 Author Members Share Posted April 15, 2008 nice, simple, basic board.would spank. thanks man!! Link to comment Share on other sites More sharing options...
Members pedalboard Posted April 15, 2008 Members Share Posted April 15, 2008 That's a lot of dirt for the size of that board. I like your choice in effects, though. Nice board. I've told myself I won't get any more dirt pedals before I get an amp with a drive channel that I really like. but in any case: HNPD! Have fun with it. Link to comment Share on other sites More sharing options...
Members ToneSlinger Posted April 15, 2008 Members Share Posted April 15, 2008 Yea, nice board. Very neat and clean. I like it. Makes mine look like total crap. of course, mine is a permanant install and i'm always swapping stuff around. Check it at:My Messy Double PedalBoard Link to comment Share on other sites More sharing options...
Members thebloodbrother Posted April 15, 2008 Members Share Posted April 15, 2008 I want one... but I want an ocd more... Link to comment Share on other sites More sharing options...
Members 88mm Posted April 15, 2008 Members Share Posted April 15, 2008 i really like it a lot.... wish the "missing" keeley bd-2 was here to run into it.... BUT i digress... It can be very transparent-ish, and then goes to pretty aggressive. from 3 oclock to full though i cant hear any increase in gain. maybe im not playing loud enough to tell ?? anyways a solid purchase. really suits my power chord tendencies!! I do need a diffeent screw to hold in the battery cover though.... I am happy that you like it.Cause I'm keeping your Bad Monkey!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.