Members Jbrazz Posted April 7, 2008 Members Share Posted April 7, 2008 after i finally get the pedals i want in my sig, (by the end of the month) ill be getting my pedal train and, i think, a voodoo pedal power 2. im pretty sure this will work but i just wanted to run it past you guys first. before i start, all outputs can be changed to standard 9 volts right? anyway, this is how i will have it set up: PolyChorus - output 1 + 2 (changed to 12v each, which = 24v output) sd-1 - output 3 PS-3 - output 4 PS-3 - output 5 (9v) RE-20 - output 6 Rat - output 7 (9v) Singing tree - output 8 (9v) will this work? i plan on just plugging my digitech whammy into the back of the pedal power, or just a power strip. thanks, Joey Link to comment Share on other sites More sharing options...
Members Jbrazz Posted April 7, 2008 Author Members Share Posted April 7, 2008 uhh Link to comment Share on other sites More sharing options...
Members monkeyland Posted April 7, 2008 Members Share Posted April 7, 2008 i don't see why not. Link to comment Share on other sites More sharing options...
Members Knowdice Posted April 7, 2008 Members Share Posted April 7, 2008 I think you'll need the PP2+ to power the RE-20. The regular PP2 won't power Boss twin pedals. Link to comment Share on other sites More sharing options...
Members monkeyland Posted April 7, 2008 Members Share Posted April 7, 2008 I think you'll need the PP2+ to power the RE-20. The regular PP2 won't power Boss twin pedals. mine does. Link to comment Share on other sites More sharing options...
Members johnrambo Posted April 7, 2008 Members Share Posted April 7, 2008 how do you change the outputs to run at 12V for the polychorus? Link to comment Share on other sites More sharing options...
Members Jbrazz Posted April 7, 2008 Author Members Share Posted April 7, 2008 how do you change the outputs to run at 12V for the polychorus? the polychorus need 24v right? because in the first 4 outputs, you can switch them from 9v to 12v and then all you need it the adapter that changes the 2 outputs to 1 input i ment the PP2+ Link to comment Share on other sites More sharing options...
Members johnrambo Posted April 7, 2008 Members Share Posted April 7, 2008 the polychorus need 24v right?because in the first 4 outputs, you can switch them from 9v to 12v and then all you need it the adapter that changes the 2 outputs to 1 inputi ment the PP2+ i was just wondering how you go about switching the outputs from 9V to 12V. is that what those switches on the bottom are for? Link to comment Share on other sites More sharing options...
Members Jbrazz Posted April 7, 2008 Author Members Share Posted April 7, 2008 i was just wondering how you go about switching the outputs from 9V to 12V. is that what those switches on the bottom are for? yeah, you might want to look at the manual, im not the guy to ask Link to comment Share on other sites More sharing options...
Members andreas Posted April 7, 2008 Members Share Posted April 7, 2008 The RE-20 will work from any of the outputs (in normal mode), with both the non-plus and plus model, as it only draws 75mA. Some of the Twin pedals draw more than 100mA, and require the "plus" model to work, but not the RE-20. Jbrazz - it looks like it should work fine. The 24 volt setup you'll get with the series Y-cable only has 100mA available, but that's the limit of the E-H adapter too, so... /Andreas Link to comment Share on other sites More sharing options...
Members Jbrazz Posted April 7, 2008 Author Members Share Posted April 7, 2008 yeah all i need is the 11th cable downhttp://www.voodoolab.com/cables.htm Link to comment Share on other sites More sharing options...
Members Knowdice Posted April 7, 2008 Members Share Posted April 7, 2008 mine does.Well I sit/stand corrected. Good to know I can use a RE-20 with my PP2. Hmmmm.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.