Members losergeek Posted April 11, 2008 Members Share Posted April 11, 2008 How much height can it handle? I'm looking at the specs and am nervous about putting a very tall pedal or two in. Frame: 32" x 16" x 3"/7 lbs.Case: 34" x 18" x 5.5"/7 lbs. 2.5 inches of space? Is this without stretching? Do you feel it should be able to handle most everything? Alex Link to comment Share on other sites More sharing options...
Members SharkMinusBear Posted April 11, 2008 Members Share Posted April 11, 2008 Remember the board is sloped though, so that 3inches is at its highest point towards the back. You will have more clearance in the front. That said, I have a Line 6 modeler in the back which is pretty tall and I've had no problems with clearance. Link to comment Share on other sites More sharing options...
Members MickSlick Posted April 11, 2008 Members Share Posted April 11, 2008 They give you some room height and width wise, which is nice, since pedals and wires etc... can overhang the board Link to comment Share on other sites More sharing options...
Members masterwuhan Posted April 11, 2008 Members Share Posted April 11, 2008 I have an Ultra-Lord and a DL-4 on the back row of my Pedaltrain and they do fine. The Ultra, in particular, is pretty tall. I assume that with the soft case, you won't be stacking things on top of the case anyway, so the only real issue should be whether or not the case will close, right? Link to comment Share on other sites More sharing options...
Members losergeek Posted April 17, 2008 Author Members Share Posted April 17, 2008 Cool, thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.