Jump to content

Telecaster Dudes, please , technical question


tetaJ

Recommended Posts

  • Members

I have a 2008 Am STD Tele.

 

I want to change the bridge pickup for a Tom Anderson, which i have used all of my life in my Guitars.

 

I do my Strat changes, but the Tele is a bit different do to the pickup been mounted on the metal plate.

 

Is it an easy task to change the pickup in a Tele?

 

Thanks

Link to comment
Share on other sites

  • Members

yeap, but when i mount ti again, will i have intonation problems , will it have to be set up again, due to the whole bridge been screwed in the wood and all?

 

THanks again, you guys rule.

 

I think the worst that can happen is that i have to take it to the tech after i am done, hehehehheheheh

Link to comment
Share on other sites

  • Members

yeap, but when i mount ti again, will i have intonation problems , will it have to be set up again, due to the whole bridge been screwed in the wood and all?


THanks again, you guys rule.


I think the worst that can happen is that i have to take it to the tech after i am done, hehehehheheheh

 

 

Nah, the screw holes aren't moving, bro.

You'll be fine, just take into advice what the person above me said... make sure if there is a ground wire under there, to get it put back very securely.

 

You're good.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...