Members ReckedTrek Posted May 3, 2008 Members Share Posted May 3, 2008 Will the TC SCF buffered out do a good job of restoring the signal for about a 20 foot cable run to the amps input (clean amp) after my effects chain which is almost all TB? I'm thinking of putting it after my UD Stomp for this purpose. Link to comment Share on other sites More sharing options...
Members IvIark Posted May 3, 2008 Members Share Posted May 3, 2008 The UD Stomp output is buffered Link to comment Share on other sites More sharing options...
Members ReckedTrek Posted May 4, 2008 Author Members Share Posted May 4, 2008 The UD Stomp output is buffered Yes, but as good as the Yamaha is, I was wondering if the TC might be a little higher quality. Also, the Yamaha seems to take louder levels in than the TC does (the overload light on the TC comes on) so I thought I could tame the level with the UD Stomp then send it out with the TC (boosted back up just a bit). What do you think? Link to comment Share on other sites More sharing options...
Members petejt Posted May 4, 2008 Members Share Posted May 4, 2008 Will the TC SCF buffered out do a good job of restoring the signal for about a 20 foot cable run to the amps input (clean amp) after my effects chain which is almost all TB? I'm thinking of putting it after my UD Stomp for this purpose. The SCF does a great job of buffering the signal, no bottom end or trebles lost at all. It should be fine anywhere in your signal chain. Link to comment Share on other sites More sharing options...
Members ReckedTrek Posted May 4, 2008 Author Members Share Posted May 4, 2008 Thanks IvIark and petejt. I'm going to give it a try today as I have some time to myself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.