Jump to content

Would this work with an A/B/Y box?


geek_usa
 Share

Recommended Posts

  • Members

I have some really cool old vintage pedals that I like to use, in fact I haven't used them for awhile. I just realized that they all suck a bit of tone and volume and I had an idea and was curious if it would work.

 

Have a clean signal just straight from my guitar to my amp, and then an "effected" path that I can switch on. Would I use an A/B/Y box for this using the "A&B" setting? If so, how would I route the signal? Would I need a 1/4" male to two 1/4" female coming from my amp?

 

 

thanks

Link to comment
Share on other sites

  • Members

Just make a true bypass pedal, the ABY in AB mode will result in having 2 inputs unless you either put another AB box in or you have a stereo input on your amp..

 

Leave your tone sucking pedals on all the time, and you switch them on or off via the TB box..

 

Ive got a strip of 4 TB loops and another single TB box..

 

IMG_0359.jpg

 

IMG_0274-1.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...