Members geek_usa Posted May 28, 2008 Members Share Posted May 28, 2008 I have some really cool old vintage pedals that I like to use, in fact I haven't used them for awhile. I just realized that they all suck a bit of tone and volume and I had an idea and was curious if it would work. Have a clean signal just straight from my guitar to my amp, and then an "effected" path that I can switch on. Would I use an A/B/Y box for this using the "A&B" setting? If so, how would I route the signal? Would I need a 1/4" male to two 1/4" female coming from my amp? thanks Link to comment Share on other sites More sharing options...
Members geek_usa Posted May 28, 2008 Author Members Share Posted May 28, 2008 :poke: Link to comment Share on other sites More sharing options...
Members z1o Posted May 28, 2008 Members Share Posted May 28, 2008 boss ls2 Link to comment Share on other sites More sharing options...
Members Saturnine10 Posted May 28, 2008 Members Share Posted May 28, 2008 Just make a true bypass pedal, the ABY in AB mode will result in having 2 inputs unless you either put another AB box in or you have a stereo input on your amp.. Leave your tone sucking pedals on all the time, and you switch them on or off via the TB box.. Ive got a strip of 4 TB loops and another single TB box.. Link to comment Share on other sites More sharing options...
Members bowlingshirt Posted May 28, 2008 Members Share Posted May 28, 2008 You can get a true bypass looper pedal that will essentially remove the pedal from your signal path until you want to turn it on. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.