Jump to content

GGG Kit Help ('69 Fuzz Face)


Recommended Posts

  • Members

I just received my '69 fuzz face kit from ggg. I've been building it and have almost finished populating the pcb. The instructions talk about some optional componenets at R1, C4, C6, and D3. I'm not sure I want to put them all in. Do I need to install a jumper wire where these components would go? Or do I just leave it alone and put absolutely nothing in these spaces.

 

Any other fuzz face kit tips are welcome as well. When I'm done with this I'll post a HNFKD (finished kit day) and hopefully some clips.

 

Thanks for any help.

Link to comment
Share on other sites

  • Members

I don't see C4 on the schemo...

No jumpers are needed, just leave it alone like you said.
That said I will at least keep R1. R1 & R12 are there to prevent the switch from popping.
D3 & C6 are usefull if you're going to put a DC power adapter jack. C6 is a power supply filtering capacitor & D3 is a reverse polarity protection diode.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...