Jump to content

double loop/channel switcher


symeboy

Recommended Posts

  • Members

Anyone heard of one?

 

So you hit one stomp box and it simultaneously switches amp channels AND switches effects.

 

Example: I hit it once and I get channel 1 on my amp with chorus, hit it again and I get channel 2 with overdrive and reverb.

 

A bit like this product but with two loops...

http://www.loop-master.com/product_info.php?cPath=33&products_id=167

 

It might not be possible I guess because two loops would mean two signal paths and only one amp input? :confused:

Link to comment
Share on other sites

  • Members

But what if you don't want the effect on at all? It seems like you would have to switch off the chorus (in their example) if you wanted just a clean channel, in which case I'd rather just use the amp footswitch and other pedals.

Perhaps if it had a second switch to take everything out of the loop.

Link to comment
Share on other sites

  • Members
surely that was to easy, there must be a catch!



No catch. I have been offering those for a while now. They work great.

But what if you don't want the effect on at all? It seems like you would have to switch off the chorus (in their example) if you wanted just a clean channel, in which case I'd rather just use the amp footswitch and other pedals.


Perhaps if it had a second switch to take everything out of the loop.



That's easy too. I can just add a master bypass switch to the pedal. And what about a tuner out? Yes. :thu:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...