Members Seth Carmody Posted January 31, 2012 Members Share Posted January 31, 2012 I've got a cioks power supply en route and it seems my PT-3 has not come pre-drilled for the mounting brackets. The idea of ripping all the pedals off and doorknocking for a loan of a power drill isn't too appealing, so I'm thinking why don't I just velcro the damn thing on like a pedal. It's only 900g, so I'm thinking the velcro should hold it in place no problem - gravity schmavity. Any of you dudes tried this only for it to end in tears? Link to comment Share on other sites More sharing options...
Members big69 Posted January 31, 2012 Members Share Posted January 31, 2012 Should be fine with the industrial strength stuff. If not, zip ties and eye hole screws. Link to comment Share on other sites More sharing options...
Members cryptosonic Posted January 31, 2012 Members Share Posted January 31, 2012 Works fine. It will loosen up a bit over time but you just stick it down again. Link to comment Share on other sites More sharing options...
Members pktsymph Posted January 31, 2012 Members Share Posted January 31, 2012 never had mine come loose in about a year and a half and i gig a lot. itll be fiiiiine. Link to comment Share on other sites More sharing options...
Members Seth Carmody Posted January 31, 2012 Author Members Share Posted January 31, 2012 Sweeeeeeeet! Thanks guys Link to comment Share on other sites More sharing options...
Members jnepo1 Posted January 31, 2012 Members Share Posted January 31, 2012 I would suggest Dual Lock over velcro. The trick is to apply the Dual Lock to the PSU and to the Pedaltrain and allow the adhesive to set for a period of 24-48 hours. Then apply the PSU to the Pedaltrain. Link to comment Share on other sites More sharing options...
Members IRG Posted January 31, 2012 Members Share Posted January 31, 2012 I had velcro'd a DC Brick one time to a board, forgot exactly how I was fastening it, other than velcro, but the velcro (industrial) pulled away from the Brick itself. Anyway, it didn't work like I I wanted. I would use zip ties instead, get black ones, you will hardly notice it. Link to comment Share on other sites More sharing options...
Members frenchji Posted January 31, 2012 Members Share Posted January 31, 2012 you could just zip-tie it on.. or better yet.. not be lazy and get a drill. Link to comment Share on other sites More sharing options...
Members Reauchambeau Posted January 31, 2012 Members Share Posted January 31, 2012 crazy glue that shiz Link to comment Share on other sites More sharing options...
Members MesaMonster Posted February 1, 2012 Members Share Posted February 1, 2012 I do both. I have mine velcroed and I use tie wraps just in case. Link to comment Share on other sites More sharing options...
Members the.nameless Posted February 1, 2012 Members Share Posted February 1, 2012 I hold on all my pedals with my own brand of home made twine. Works a treat. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.