Jump to content

Fixed My DOA Presonus Firepod (FP10) Today. Thank You Solder.


Recommended Posts

  • Members

For about 7 months my Firepod has been dead. Today I cracked it open, saw some burn on the power switch connector on the board. I pulled the small white connector/jumper off the board to expose 2 small metal prongs. I used a screwdriver to connect the prongs and the unit powered up.


I took a switch the same from a pc power supply and soldered wires from it to the prongs on the board. Closed the unit up and it is working 100% again. It is like I saved $600!










Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...