Jump to content

6506+bad monkey


ThyHorrorCosmic

Recommended Posts

  • Members

why would u boost the clean channel of that amp? What kind of tone are u going for? I'm sure if its anything heavy, then i wont be the only one to say, use gain from the amp, and add some more with the bad monkey...if u need it. I didnt like using a boost too much when i tried it with my 5150, i used a maxon OD830 i think it was. It just took away from the raw sound of the amp.

Link to comment
Share on other sites

  • Members

 

Originally posted by ThyHorrorCosmic



this is my plan exactly, what are some of your settings?

 

 

take into account mine has been modded from a 5150II into a 5150, has a bias mod and a clarity mod.

for the settings on the

 

5150: low, mid high are all around 5. Pres is about 7, res is at 3. Gain is at 4.

 

For the bad monkey:level on 10, low at about 2, high about 3,and gain at 0.

 

MXR 10 band I have set on a reverse smiley face.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...