Members elsongs Posted October 25, 2009 Members Share Posted October 25, 2009 1) Model of Synth: Yamaha AN1x 2) Battery Type: 3v CR2450 3) Any relevant fitting information: Standard 'slip in/slip out' CR2450 Battery holder. Notes: Don't forget to back up your sounds with the AN1x Edit software editor/librarian! I had to swap out my battery just hours before a gig but everything worked without a hitch after backup/restore! Battery location: Link to comment Share on other sites More sharing options...
Members baz101 Posted November 22, 2009 Members Share Posted November 22, 2009 1) Model of Synth: Yamaha SY85 2) Battery Type: 3v CR2450 with tags 3) Any relevant fitting information: Will require CR2450 with solder legs, or alternatively you can fit a CR2450 battery holder with 20mm pitch legs. Removal of main processor board required. Battery location: Full instructions available on this page: http://www.sector101.fsnet.co.uk/sy85_battery.html Link to comment Share on other sites More sharing options...
Members Jugo6 Posted October 28, 2019 Members Share Posted October 28, 2019 Model of synth : Roland JV-1010 (module) Battery model : CR 2032 (as many others) Don't bother to open the little tile on top. Just unscrew the sides and 1 screw at the back, slide the top backwards and lift Battery is easily found, lift it a little bit and slide out. Take a premium model of battery to avoid damage to your synth or re-opening too soon. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.