How to remove grill from cab?

[rsf1977]

hey just wondering before i start messing around... how do you get the grill off a Marshall 1960B cab

[mcarse81]

sorry to change the topic, but do you have clips of your recto with the KT66's?

[pink freud]

[rsf1977]

 

Originally posted by mcarse81 sorry to change the topic, but do you have clips of your recto with the KT66's?

 

 

Well I will when my band finishes recording our cd. The only problem is groove tubes discontinued the KT66HP

[rsf1977]

bump

[Pepi]

Screws are inside going out into the grill .... I think

[andersonman]

I just did this.

 

--Remove the screws from the back of the cab and remove the back panel.

--Unscrew the side handles and remove them.

--Remove the speakers

--There are four bolts that you have to remove that bolt the wooden grill frame into the cabinet. There should be one in each corner.

--Once the grill frame is no longer bolted in to the cab slide the grill frame out of the back of the cab.

 

Hope this helps.

[rsf1977]

 

Originally posted by andersonman I just did this. --Remove the screws from the back of the cab and remove the back panel. --Unscrew the side handles and remove them. --Remove the speakers --There are four bolts that you have to remove that bolt the wooden grill frame into the cabinet. There should be one in each corner. --Once the grill frame is no longer bolted in to the cab slide the grill frame out of the back of the cab. Hope this helps.

 

 

Jeeeez... are you serious to get the front grill off I need to take out all 4 speakers! That's crazy!

[andersonman]

You can leave the speakers attached to the cab but why would you? We're talking about a ratchet wrench and 16 small bolts. You can have those speakers out in a couple of minutes. If your aim is to replace the grill cloth then you will want to remove the speakers. You don't have to remove them but it sure would make life a lot easier if you did.