Members ungarn Posted December 4, 2010 Members Share Posted December 4, 2010 Does anyone know where to get replacement knobs for an Ampeg VH140C head? It uses Crate/Ampeg/SLM/Loud proprietary pots that are board mounted, and have plastic shafts that are approximately 4.6 mm or 0.18" in diameter. Most replacement knobs I can find have at least a 6 mm shaft. Thanks in advance! Link to comment Share on other sites More sharing options...
Members trailsofsin Posted December 4, 2010 Members Share Posted December 4, 2010 I got some replacement knobs for my VH-140C combo from Antique Electronics Supplyhttp://www.tubesandmore.com/I'm assuming the head has the same knobs? Link to comment Share on other sites More sharing options...
Members ungarn Posted December 4, 2010 Author Members Share Posted December 4, 2010 I got some replacement knobs for my VH-140C combo from Antique Electronics Supply http://www.tubesandmore.com/ I'm assuming the head has the same knobs? Thanks...the VH140c knobs look like those P-K324 knobs...I just do not know if the "D shaft" will fit on those small plastic spline shafts. I'll have to contact them. Link to comment Share on other sites More sharing options...
Members jr_vw2 Posted December 26, 2010 Members Share Posted December 26, 2010 What did you come up with on those knobs? IM in the market as well Link to comment Share on other sites More sharing options...
Members ungarn Posted December 26, 2010 Author Members Share Posted December 26, 2010 What did you come up with on those knobs? IM in the market as well Nada!Abell Audio was trying to get some from LOUD.It is a proprietary potentiometer...so nothing stock at Mouser and the like.I might just tape up the shafts and use inexpensive 6mm shaft knobs from Mouser.I only need 6 knobs to refurb my VH140c head. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.