Members DietVRG Posted August 13, 2007 Members Posted August 13, 2007 My Cort accoustic guitar has a fitted Fishman Pickup with Prefix Plus system. The wires are bundled together by a clip which used to be attached somewhere inside the guitar box with double sided tape. I have re-attached it once before but it comes loose again. Any suggestions on how to secure it permanently, so that no strain is placed on the wiring.
Members garthman Posted August 13, 2007 Members Posted August 13, 2007 Glue the clip to the inside of the guitar with a good contact adhesive like Evostick or similar.
Members guitarist21 Posted August 13, 2007 Members Posted August 13, 2007 My old Washburn dread had the same problem. I used duct tape, which works fine if you're willing to have some residue if you ever take the tape off. I just knew I wasn't planning on selling the guitar and that if I did, it would be worth very little, so ruining it wouldn't be a huge deal. Ellen
Recommended Posts
Archived
This topic is now archived and is closed to further replies.