Jump to content

Monitor problem Event TR8


Recommended Posts

  • Members

So one of my monitors was hummin when I plugged it in. I turned it on and it really hummed, so I quickly turned everything off. Checked all the wiring, unhooked it plugged it in on it's own and it still does it. I'm figuring something inside it has gone bad. it's no longer under warranty and have no idea what's up with it? Should I try to deal with Event, a tech, or cut my losses and look for a new one? any help is appreciated.

Link to comment
Share on other sites

  • Members

So one of my monitors was hummin when I plugged it in. I turned it on and it really hummed, so I quickly turned everything off. Checked all the wiring, unhooked it plugged it in on it's own and it still does it. I'm figuring something inside it has gone bad. it's no longer under warranty and have no idea what's up with it? Should I try to deal with Event, a tech, or cut my losses and look for a new one? any help is appreciated.

 

It could be something as small as a broken ground wire. You might try having a tech look at it. You might also contact Event and see what they suggest, it might be cheaper than buying a new set of speakers.

Link to comment
Share on other sites

  • Members

Ditto that.

 

Do NOT throw out your speaker(s). [You can PM me for a shipping address and send them to me shipping-COD, though, if you want. :D ]

 

In all likelihood, your hum problem is simply a wire that's come loose.

 

It's quite possible/likely to be something a reasonably tech-savvy person with a soldering iron can find and fix.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...