Members mbengs1 Posted July 16, 2019 Members Share Posted July 16, 2019 I needed to raise the height of the pickup to get more output and sustain so I unscrewed the pickup from the body and put a layer of foam under the pickup. I screwed back the pickup into the body and I didn't get any sound. There's no sound coming out. The bridge pickup and middle pickup still work. The neck pickup just died. What happened to the pickup? Link to comment Share on other sites More sharing options...
Members badpenguin Posted July 16, 2019 Members Share Posted July 16, 2019 Check to see if pulling the pickup out, you broke the solder joints to the switch. Most likely that happened. Link to comment Share on other sites More sharing options...
Members catscurlyear Posted July 17, 2019 Members Share Posted July 17, 2019 you must have used the wrong foam wiring config, Link to comment Share on other sites More sharing options...
Members 1001gear Posted July 17, 2019 Members Share Posted July 17, 2019 It's prolly too late for a defib. Link to comment Share on other sites More sharing options...
Members gardo Posted July 17, 2019 Members Share Posted July 17, 2019 Link to comment Share on other sites More sharing options...
Members mbengs1 Posted July 17, 2019 Author Members Share Posted July 17, 2019 No wires got pulled out of place. Everything seems normal. Just the sound is very weak. almost no sound at all. It's a Seymour Duncan single coil neck pickup and in the bridge is a dimarzio super distortion. Maybe combining pickups from different companies causes one of the pickups to break? Link to comment Share on other sites More sharing options...
Members badpenguin Posted July 17, 2019 Members Share Posted July 17, 2019 . Maybe combining pickups from different companies causes one of the pickups to break? Uhhh, No, just so no. Oh, why did I bother trying to help? Link to comment Share on other sites More sharing options...
Members mrbrown49 Posted July 17, 2019 Members Share Posted July 17, 2019 Maybe you flexed the base plate enough with the pressure from the the foam to break the solder joint inside the pup. Those little wires can be fragile. how thick of a piece did you put in, how stiff is it, and how much did you compress it? Link to comment Share on other sites More sharing options...
Members gardo Posted July 17, 2019 Members Share Posted July 17, 2019 Pictures would help Link to comment Share on other sites More sharing options...
Members onelife Posted July 17, 2019 Members Share Posted July 17, 2019 I needed to raise the height of the pickup to get more output and sustain so I unscrewed the pickup from the body and put a layer of foam under the pickup. I screwed back the pickup into the body and I didn't get any sound. There's no sound coming out. The bridge pickup and middle pickup still work. The neck pickup just died. What happened to the pickup? how is the pickup mounted in the guitar? Link to comment Share on other sites More sharing options...
Members catscurlyear Posted July 17, 2019 Members Share Posted July 17, 2019 call the cops ,you should report it to be honest. Link to comment Share on other sites More sharing options...
Members gardo Posted July 17, 2019 Members Share Posted July 17, 2019 call the cops ' date='you should report it to be honest.[/quote'] Do you suspect foul play? most likely criminal negligence Link to comment Share on other sites More sharing options...
Moderators daddymack Posted July 17, 2019 Moderators Share Posted July 17, 2019 I would suggest you reverse the procedure and see if the p-up comes back to life...as if by magic...the other possibility is you raised the pickup too close to the strings and the field is above the string level... Link to comment Share on other sites More sharing options...
Members Chordite Posted July 17, 2019 Members Share Posted July 17, 2019 Question it with a continuity meter, see how much resistance you meet. Link to comment Share on other sites More sharing options...
Members jtr654 Posted July 17, 2019 Members Share Posted July 17, 2019 I told you are cursed.Why you think the marginal Increase in putting a single coil was going to help. Haven't you had problems with all you guitars and the only thing any have in common is YOU. Link to comment Share on other sites More sharing options...
Members catscurlyear Posted July 17, 2019 Members Share Posted July 17, 2019 Do you suspect foul play? most likely criminal negligence spongebob done it Link to comment Share on other sites More sharing options...
Members Chordite Posted July 17, 2019 Members Share Posted July 17, 2019 Just to confirm that you didn't use the black conductive foam from a semiconductor pack? Link to comment Share on other sites More sharing options...
Moderators daddymack Posted July 18, 2019 Moderators Share Posted July 18, 2019 Just to confirm that you didn't use the black conductive foam from a semiconductor pack? oh, please nooooo....! Link to comment Share on other sites More sharing options...
Members Emory Posted July 18, 2019 Members Share Posted July 18, 2019 If the pickup died, just take it to next gig and bury it in the mix. Link to comment Share on other sites More sharing options...
Members mbengs1 Posted July 18, 2019 Author Members Share Posted July 18, 2019 Just to confirm that you didn't use the black conductive foam from a semiconductor pack? No. just plain old phoam from the pickup box. Link to comment Share on other sites More sharing options...
Members gardo Posted July 18, 2019 Members Share Posted July 18, 2019 I would suggest you reverse the procedure and see if the p-up comes back to life...as if by magic... Did you try this ? Link to comment Share on other sites More sharing options...
Members Mr.Grumpy Posted July 18, 2019 Members Share Posted July 18, 2019 Just to confirm that you didn't use the black conductive foam from a semiconductor pack? That's what I was thinking too, that M. used some kind of conductive foam, and it's shorting out the pickup. I've seen some humbuckers where the coil terminals are exposed on the bottom. Remove the foam, see if the pickup comes "back to life". I'd cut out a rectangle of this cardboard to act as an insulator between the foam and pickup, or find another piece of foam. Link to comment Share on other sites More sharing options...
Members knnr Posted July 19, 2019 Members Share Posted July 19, 2019 Yes unsolder it and check it with a multimeter. Link to comment Share on other sites More sharing options...
Members mbengs1 Posted July 21, 2019 Author Members Share Posted July 21, 2019 how is the pickup mounted in the guitar? it's screwed straight into the wood. no pickup rings. Link to comment Share on other sites More sharing options...
Members Ron Kirn Posted July 21, 2019 Members Share Posted July 21, 2019 For a typical single coil pickup the following works often.. if its a Humbucker or similar constructed pickup.. it take s a bit more understanding of the construction... just take a solder tool and touch the two contact points on the bottom of the pickups, adding just enough rosin core solder to facilitate the solder flowing... the way pickups are made... the 42 AWG wire is coated with a plastic coating... since the wire is so fine it cannot be "scraped" off, the coating is designed to vaporize when the solder tools heat hits it... however when it vaporizes, there is some residue left, generally not enough to compromise the solder connection with the pickup leads, but sometimes Mr Murphy does his thing... and one of the contacts can be only marginally functional. There is really no practical way to test fro such joints... a pickup checks out as good or not so.. it may work for years, but with the constant avalanche of vibrations from handling the guitar AND from the strings... ( or removing it, putting foam under it and remounting it) the already weak contact can "let go"... simply reheating, adding fresh solder and flux will restore it to like new... give it a try. This will not repair 100% of non functioning pickups, but it does restore a hellovah lot of them... a solder tool is about 9 bux and a roll of solder a few bux... a new pickup is 80... Ron Kirn Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.