Members Chordite Posted February 14, 2019 Members Share Posted February 14, 2019 I was having a guitar browse (on zero frets as it happens) and came across references to fanned fret guitars.I can see the theory behind it but it looks to me like a co ordination crisis to play. But an interesting concept none the less. Anybody handled one?[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"t2DP0.jpg","data-attachmentid":32475137}[/ATTACH] Link to comment Share on other sites More sharing options...
Members madjack Posted February 14, 2019 Members Share Posted February 14, 2019 I've not tried a 6-string but a close friend of mine had a couple of 5-string basses with fanned frets. It's difficult if one looks at the neck too closely while playing, but just forgetting about the frets and playing made it quite easy. I like the idea for basses as it gives a more balanced tone across the strings due to varying lengths IMHO. Link to comment Share on other sites More sharing options...
Members 1001gear Posted February 14, 2019 Members Share Posted February 14, 2019 There are fanned frets on twisted necks as well. As long as the individual strings scale properly, it works. Looks like an intonation nightmare regardless. I have small hands so chording on widening spacing would be out of the question. Link to comment Share on other sites More sharing options...
Members catscurlyear Posted February 14, 2019 Members Share Posted February 14, 2019 great idea for those wanting deepness on the bottom and a guitar that looks skewiff to suit ,i suppose now you can get to B comfortably people will now tune it down even further ,the further down you go the nearer to beyond our hearing you get so that may not be a bad thing ,anyway i want one i think they look great. Link to comment Share on other sites More sharing options...
Members Freeman Keller Posted February 14, 2019 Members Share Posted February 14, 2019 I have played several "fanned fret" (aka multi scale) guitars. (the terms are registered I believe) The idea is that you can achieve more balanced tension across the strings if you make the bass scale length longer than the trebles. There are some obvious design considerations (now you have to select two different scales) and an important one is which fret do you make the "neutral" one (perpendicular to the strings). Also, of course, cutting the frets slots is not trivial but I've seen some pretty cool manual setups and of course with a cnc it becomes trivial. The one that I played the most had the neutral fret somewhere in the middle of the board and did not have a radical nut angle. It felt reasonable - I had to watch my hands while I was forming chords - I play a lot of barre chords and it was a little tricky but I think I could get used to it. The guitar itself was a stunning jazz style archtop - probably a $20K instrument and the worksmanship was beautiful. I'll just say that like all of the unusual configurations (7 or more strings, harp guitars), it probably has its place and in another life I might want one. As it is, I'll just wait until someone commissions one... Link to comment Share on other sites More sharing options...
Members Grant Harding Posted February 16, 2019 Members Share Posted February 16, 2019 Way less getting used to than you'd think. I've tried 2 of them and it just works. Less difficult to me than switching between steel string acoustic and classical, which I do all the time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.