Members mbengs1 Posted April 21, 2018 Members Share Posted April 21, 2018 I thought I should sand the neck about 0.5 mm to balance well with the lo pro edge. it's got the lo-trs ii before that. should I do this mod to the guitar ? Link to comment Share on other sites More sharing options...
Members badpenguin Posted April 21, 2018 Members Share Posted April 21, 2018 No one cares what you do. Link to comment Share on other sites More sharing options...
Members gardo Posted April 21, 2018 Members Share Posted April 21, 2018 I thought I should sand the neck about 0.5 mm to balance well with the lo pro edge. it's got the lo-trs ii before that. should I do this mod to the guitar ? No you should not. Based on your other posts,it's quite apparent that you lack the skill and knowledge to do the job right. Link to comment Share on other sites More sharing options...
Members hellion_213 Posted April 21, 2018 Members Share Posted April 21, 2018 i'm fairly certain the routings required for each are different, that will have to be the first item on the agenda. not sure why you would sand the neck (the pocket maybe?). Link to comment Share on other sites More sharing options...
Members mbengs1 Posted April 22, 2018 Author Members Share Posted April 22, 2018 the bridge has already been put on. It needed a reroute. I think it plays fine as it is, but was thinking i may need to have the neck sanded at the neck pocket. Link to comment Share on other sites More sharing options...
Moderators Ratae Corieltauvorum Posted April 23, 2018 Moderators Share Posted April 23, 2018 Needs about 5 mm routing out if you're going to do it properly, and don't forget to change the pickguard screws, as the old ones will be too short for Lo Pro Edge Link to comment Share on other sites More sharing options...
Moderators Ratae Corieltauvorum Posted April 23, 2018 Moderators Share Posted April 23, 2018 I would to be on the safe side Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.