Members dmtnt Posted March 14, 2006 Members Share Posted March 14, 2006 Ok, please tell me if I got this right. I want to run a wet/dry rig with my G-Force. I'm thinking I should: 1. Run one output from my preamp into the G-Force (setting it for L-Only input) and the other preamp output into a line mixer. 2: Take the L & R outputs from the G-Force, run those into the line mixer, and enable KillDry. 3: Run the line mixer outs into my power amp. 4: Finally, pan the dry signal to center and the wet signal to left and right respectively. Sound correct? Link to comment Share on other sites More sharing options...
Members Jason_86_951 Posted March 14, 2006 Members Share Posted March 14, 2006 Not exactly.An example of wet / dry would be: Preamp out 1 to left side of power amp.Preamp out 2 to effects with drykill engaged and then to right side of power amp. This gives you 1 cab with 100% dry and 1 cab with 100% wet. Wet/dry/wet: Amp head speaker output to cab.Direct out of head into mono input of effects, then left/right into stereo power amp feeding 2 cabs. Set cabs in a wet/dry/wet spacing. This sounds amazing if you've never done it, DO IT! Link to comment Share on other sites More sharing options...
Members tats_dragon Posted March 14, 2006 Members Share Posted March 14, 2006 +1 on the W/D/W. Hassle to setup and mic but the ultimate guitar sound. Jun Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.