Members MLattack Posted March 29, 2009 Members Share Posted March 29, 2009 I got and finally I'll cap it off with an MP-1 or a JMP-1 for live stuff, the podxt being for bedroom jammin and cover stuff. Now I just need an actual rack to put all this stuff in:lol: Link to comment Share on other sites More sharing options...
Members Inazone Posted March 29, 2009 Members Share Posted March 29, 2009 Why not just use the POD with the Carvin? That's possibly the most transparent-sounding tube power amp you're going to find, so it should be a pretty good match with a POD. Link to comment Share on other sites More sharing options...
Members MLattack Posted March 29, 2009 Author Members Share Posted March 29, 2009 Why not just use the POD with the Carvin? That's possibly the most transparent-sounding tube power amp you're going to find, so it should be a pretty good match with a POD. I'm going to try that first. If it doesn't work well live I'll use the MP-1 for the preamp and the pod for fx. I used line 6 stuff live before and it never cut through too well but then again I wasn't using tube power. Link to comment Share on other sites More sharing options...
Members bigjd Posted March 30, 2009 Members Share Posted March 30, 2009 Be sure to check the bias on that Carvin. I re-set mine yesterday and it was noticably better sounding. Link to comment Share on other sites More sharing options...
Members Kendall Posted March 30, 2009 Members Share Posted March 30, 2009 I've found that the Carvin works better in a full range setting unless you rebias it. If you have cab models in the POD then you should be straight without having to mess with the power amp. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.