Jump to content

Problem looping with Voodoo Lab Ground Control System


Recommended Posts

  • Members

If you want to control the stomp boxes with the Ground Control Pro you will need some kind of audio switcher like a Voodoo Lab GCX. Switching pedals on/off and changing presets is pretty easy with a Ground Control/GCX system once you get it set up.

 

I'm not sure what you mean by "without loosing the pedals system".

Link to comment
Share on other sites

  • Members

 

If you want to control the stomp boxes with the Ground Control Pro you will need some kind of audio switcher like a Voodoo Lab GCX. Switching pedals on/off and changing presets is pretty easy with a Ground Control/GCX system once you get it set up...

This is the way to go and it is not difficult at all.

 

Your pedals will plug into the eight loops of the GCX in whatever order you prefer. You will use the upper two rows of switches for instant access to your pedals and the bottom row of four switches for MIDI program changes.

 

Please understand this is not quite as limiting as it sounds. The top two rows of switches can be used to activate/deactivate individual effects one at a time OR they can be used to control multiple loops just by stepping on a single switch, e.g., stepping on Switch 1 will activate Loops 2, 5, 7, & 8 simultaneously. You also will have 36 banks of four presets each, all accessible via the bottom row of switches.

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...