Members stevmac1 Posted March 26, 2014 Members Share Posted March 26, 2014 Or should I master/slave them?With 6 LED cans, wanting 1 the same as 4, 2 the same as 5, and 3 the same as 6.They are Puck RGBA. steve Link to comment Share on other sites More sharing options...
Members mate_stubb Posted March 26, 2014 Members Share Posted March 26, 2014 Shouldn't be a problem, as long as the fixtures are identical. Link to comment Share on other sites More sharing options...
Members Bill.ESC Posted March 27, 2014 Members Share Posted March 27, 2014 ^^^ Correct. Link to comment Share on other sites More sharing options...
Members mstreck Posted March 27, 2014 Members Share Posted March 27, 2014 I do it all the time - no problems. Link to comment Share on other sites More sharing options...
Members Voltage55 Posted March 27, 2014 Members Share Posted March 27, 2014 You could put every one of them on the same address if you wanted to. Theyre just all going to act the same. Link to comment Share on other sites More sharing options...
Members StratGuy22 Posted March 27, 2014 Members Share Posted March 27, 2014 I do it all the time. I always pair my washes from the outside, a mirror image. It's a habit from the old days when I did it to save dimmer channels. Now I like the effects I get with it. Instead of a chase running across from left to right both sides will chase to the middle or chase outwards. I use 11 lights so there's a central fixture. Plus it makes alternating colors a snap as well. Here's a couple video examples, again Link to comment Share on other sites More sharing options...
Members stevmac1 Posted March 27, 2014 Author Members Share Posted March 27, 2014 Cool, THANKS!!! steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.