Members barriojunk Posted July 10, 2016 Members Share Posted July 10, 2016 Hi I have a quad 520f power amplifier with xlr outputs. How do I connect these to my NS10 speakers? Can I strip a standard XLR microphone cable down to the positive and negative wires and shield the ground with electrical tape? thanks so much! Link to comment Share on other sites More sharing options...
Members dboomer Posted July 10, 2016 Members Share Posted July 10, 2016 You don't want to use a converted mic cable as a speaker cable. You should just built a proper speaker cable with whatever the necessary ends are. Link to comment Share on other sites More sharing options...
Members wesg Posted July 10, 2016 Members Share Posted July 10, 2016 Power amp with XLR outs? That's unusual! If I was the amp owner...I would think about changing it over to something a little more standard (speak-on), and buying off-the-shelf cables. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.