Members Tomm Williams Posted July 5, 2014 Members Share Posted July 5, 2014 In need of a lube for a Soundcraft board with sticky faders.....................suggestions ? Link to comment Share on other sites More sharing options...
Members dennis a Posted July 5, 2014 Members Share Posted July 5, 2014 In need of a lube for a Soundcraft board with sticky faders.....................suggestions ? Is this for the Soundcraft monitor board that you got for next to nothing? Link to comment Share on other sites More sharing options...
Members agedhorse Posted July 6, 2014 Members Share Posted July 6, 2014 Depending on the style of fader, it's either a candidate for a fader rebuild (if it uses guide dowels) or replacement. Spraying conventional faders usually causes more problems than it solves, even using the right material. Link to comment Share on other sites More sharing options...
Members Pro Sound Guy Posted July 6, 2014 Members Share Posted July 6, 2014 Just got a flyer from Parts Express. They are having a "Caig" sale. Caig makes fader lube. Not sayin...just sayin. Link to comment Share on other sites More sharing options...
Members agedhorse Posted July 6, 2014 Members Share Posted July 6, 2014 The problem with tryingto lube faders that are conventional style is that the lube needs to be spearate from the conductive track. 2 different materials involved. The cost of doing it right on these types of faders is greater than just buying new faders. On the dowel style, the cost ofthe part is much higher so the added lable is justified in some cases. Link to comment Share on other sites More sharing options...
Members Tomm Williams Posted July 7, 2014 Author Members Share Posted July 7, 2014 Just exercised the hell out of them, made a big difference. They work well (enough) now. Link to comment Share on other sites More sharing options...
Members agedhorse Posted July 8, 2014 Members Share Posted July 8, 2014 Next time you come down, bring the board and I can show you your options. Link to comment Share on other sites More sharing options...
Members Tomm Williams Posted July 8, 2014 Author Members Share Posted July 8, 2014 I'll be sending you a photo of the pots later today. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.