Members randyfrisk Posted May 28, 2013 Members Share Posted May 28, 2013 Does anyone know where I can get a power source for my General Music Pro 2 Made in Italy I think I have part of it but am not sure a bunch of gear went missing in storage. Thanx Randy Link to comment Share on other sites More sharing options...
Members mooncalf2012 Posted November 22, 2013 Members Share Posted November 22, 2013 You need to get a Peavey 03013830 16.5 Volt AC Power Supply II (+ positive center). I bought one for my PRO2 for about $16.00 on eBay, and it is a very solid supply, (much better than the original, which actually supplied too much voltage and had a bad hum problem). The nice thing too about the Peavey is it has a 90 degree plug that hangs nicely off the back of the PRO2, although it requires a slight mod using an xacto knife to shave off a few millimeters of plastic around the post to make it long enough to fit the PRO2 power port with the rubber grommet intact. You can also take the rubber grommet out to fit it in, but it tends to be too loose and prone to falling out. Cutting off the extra plastic lengthens it to fit perfectly and snug in the PRO2 connector. I would definitely modify it, and leave the Grommet, preventing grounding on the case which might potentially lead to a ground loop. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.