Members Midlife Rocker Posted May 4, 2015 Members Share Posted May 4, 2015 Video of how I made individual pedal/stompbox risers for my pedal board. Link to comment Share on other sites More sharing options...
Members WRGKMC Posted May 5, 2015 Members Share Posted May 5, 2015 When I made my studio pedal board, I just made a back shelf that's on an angle covered with carpet. It looks like a church organ with one set of keys above the other. The Velcro on the pedals stick to the carpet so they don't move around. The shelf is just high enough to put all my AC cords and wall warts under it. This leaves two rows with the front lower then the back. Because of this height difference there is no leaning over to get to the back row, you simply raise your foot higher and there is no need to lean over on one foot to get to the back row and possibly loose your balance playing. Because the back shelf hides all the AC and power the footprint is smaller for the number of pedals and it looks better with all that hidden. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.