Members brogan.the.turtle Posted November 20, 2014 Members Share Posted November 20, 2014 hi everyone im looking for a mod to make to a strat style partcaster im working on that will cut the tone switches to zero via the flick of a switch? i dont want to compromise using a direct-through mod but if worst comes to worse i can use it as a last resort Link to comment Share on other sites More sharing options...
Members WRGKMC Posted November 20, 2014 Members Share Posted November 20, 2014 Just use a no load pot. When the pots turned all the way up it disconnects. http://www.fender.com/guitar-bass-parts/controls-and-switches/250k-no-load-split-shaft-potentiometer-vol-or-tone/ You can turn a regular pot into a no load by taking it apart and cutting the carbon trace too but you should try it with a junk pot first so you know what's involved. http://www.projectguitar.com/tut/pots.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.