Members Verence Posted May 3, 2009 Members Share Posted May 3, 2009 B. Hefner Co. Licensed by Fender. Never been installed, no holes. Pre-cut Corian nut. 9.5 radius, 21 fret. Gloss Vintage Amber finish. Big stainless steel frets. As tall as they are wide. Very nice "C" neck. Fuller than a Warmoth thin, but I wouldn't call it fat. Dark, uniform color Rosewood fretboard. Comes with Kluson Deluxe tuners installed. Cofigure that neck on Warmoth, plus the tuners, and you're looking at around $400. I'd sell it for $200 shipped. EDIT: I took a look at the B. Hefner site. Did you have them apply the finish and do the fretwork? Is the finish nitro - or something else? Thanks! Everything on the neck was done in the B Hefner shop in California. It's beautiful. I guess the finish IS nitro. The only vintage tint finish they offer is "Vintage Yellow Gloss Nitro". EDIT: Here are some crappy night time pics. I need a new camera. I swear my hands were not shaking at ALL, but still the pics turned out all shaky. It's easy to tell that this neck would play beautifully. Nicely shaped. Straight, level, polished frets. Well dressed fret-ends. I'm TEMPTED to start another project just so I can use it... Link to comment Share on other sites More sharing options...
Members Verence Posted May 4, 2009 Author Members Share Posted May 4, 2009 Bump. I'll try to take some pics ASAP. Link to comment Share on other sites More sharing options...
Members lfrz93 Posted May 4, 2009 Members Share Posted May 4, 2009 willing to trade for a dod dfx9 delay or a boss ce3 chorus,? might be a long shot, just let me know edit: dont need tuners Link to comment Share on other sites More sharing options...
Members Verence Posted May 4, 2009 Author Members Share Posted May 4, 2009 willing to trade for a dod dfx9 delay or a boss ce3 chorus,? might be a long shot, just let me know edit: dont need tuners No, but thanks. Link to comment Share on other sites More sharing options...
Members Verence Posted May 5, 2009 Author Members Share Posted May 5, 2009 Bump. Link to comment Share on other sites More sharing options...
Members Snail_killer Posted May 5, 2009 Members Share Posted May 5, 2009 wrong thread Link to comment Share on other sites More sharing options...
Members Verence Posted May 6, 2009 Author Members Share Posted May 6, 2009 Bump. Link to comment Share on other sites More sharing options...
Members aldo247 Posted May 6, 2009 Members Share Posted May 6, 2009 Did you get my Pm ? Link to comment Share on other sites More sharing options...
Members Verence Posted May 6, 2009 Author Members Share Posted May 6, 2009 Yeah, I thought I answered it, sorry! I'll take some pics as soon as I can. (As soon as I can remember to buy batteries and take pictures while the sun's still up so they look decent). Link to comment Share on other sites More sharing options...
Members Verence Posted May 7, 2009 Author Members Share Posted May 7, 2009 Bump. Link to comment Share on other sites More sharing options...
Members Verence Posted May 8, 2009 Author Members Share Posted May 8, 2009 Bump. Link to comment Share on other sites More sharing options...
Members Verence Posted May 9, 2009 Author Members Share Posted May 9, 2009 Bump. Link to comment Share on other sites More sharing options...
Members jbeekins Posted May 9, 2009 Members Share Posted May 9, 2009 pics???? Link to comment Share on other sites More sharing options...
Members tocs100 Posted May 15, 2009 Members Share Posted May 15, 2009 Good guy: no worries about no pics yet. Link to comment Share on other sites More sharing options...
Members Verence Posted May 15, 2009 Author Members Share Posted May 15, 2009 Thanks tocs. Here are some crappy night time pics. I need a new camera. I swear my hands were not shaking at ALL, but still the pics turned out all shaky. It's easy to tell that this neck would play beautifully. Nicely shaped. Straight, level, polished frets. Well dressed fret-ends. I'm TEMPTED to start another project just so I can use it... Link to comment Share on other sites More sharing options...
Members newbuilder Posted May 15, 2009 Members Share Posted May 15, 2009 First Act Sheena (trans black) for that neck? Link to comment Share on other sites More sharing options...
Members Verence Posted May 15, 2009 Author Members Share Posted May 15, 2009 First Act Sheena (trans black) for that neck? No thanks. Link to comment Share on other sites More sharing options...
Members Verence Posted May 18, 2009 Author Members Share Posted May 18, 2009 Bump! Link to comment Share on other sites More sharing options...
Members Verence Posted May 19, 2009 Author Members Share Posted May 19, 2009 Bump. Link to comment Share on other sites More sharing options...
Members Verence Posted May 20, 2009 Author Members Share Posted May 20, 2009 Bump. Link to comment Share on other sites More sharing options...
Members sumphead Posted May 20, 2009 Members Share Posted May 20, 2009 Heel adjust truss or at neck? Link to comment Share on other sites More sharing options...
Members Verence Posted May 21, 2009 Author Members Share Posted May 21, 2009 Heel. Link to comment Share on other sites More sharing options...
Members Verence Posted May 22, 2009 Author Members Share Posted May 22, 2009 Bump. Link to comment Share on other sites More sharing options...
Members sumphead Posted May 22, 2009 Members Share Posted May 22, 2009 trade fodder HERE Link to comment Share on other sites More sharing options...
Members Verence Posted May 22, 2009 Author Members Share Posted May 22, 2009 PM'd. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.