Reply
Contributor
CleveRocks
Posts: 55
Registered: ‎03-25-2008

Splitting a Mic Signal

Singer here without too much band experience.   I'm with a band now that plays pretty loud, and IEMs are worn at practice by the lead guitar and bass (who sing backup).  They suggested I get them, but I'm going to wait a bit before I plunk down $600.    The other night when I was there for the first time, I wore the ear plugs that let some sound through.  But I strained my voice a bit trying to be heard over the band. 

Anyway, I was wondering about wearing headphones that are getting the signal off the board.  They have a pretty big mixing board.  Typically is there a way to get a line out with a separate mix than is going to the main speakers, that I could use for my headphones (ie one that would have more vocals and less guitar).  Or can you only get one mix out?    I am concerned about what would happen if there was feedback though, and me wearing headphones.

My second idea is to bring my little 150-watt 4-channel analog PA that I use to practice at home.  I have an adapter that would split the mic signal to 2 different cables.  Then one could go to my little PA, and the other to the main mixing board.  Would that work, ie would there be enough power for both PAs?

Thanks in advance for the advice!

TJ

 

 

 

 

 

Please use plain text.
Super Contributor
srp72ee
Posts: 1,072
Registered: ‎01-17-2008

Re: Splitting a Mic Signal

Their mixer should be able to send you a signal without a splitter.  The "pretty big mixing board" doesn't give me much on its capabilities.

Engineering Axiom 21: Whomever has the key should be qualified.
Please use plain text.
Super Contributor
Posts: 526
Registered: ‎08-20-2012

Re: Splitting a Mic Signal

What you want is a monitor mix. You will need something to amplify it for headphone use. A headphone amp would work. An old HiFi amp would work for practice but don't you dare take one to a gig. Hell, don't wear headphones at a gig, either, you'll look like a tool. I hate headphones. I'm a keyboard player and won't even practice with headphones. If anybody complains about the noise I switch to organ and say, sorry, no headphone jack on a Leslie. :smileywink:

It sounds like you are singing without monitors. That is the height of lunacy. You risk hurting your voice and never sound your best.

Go to your local music store before your next practice and rent a powered monitor and whatever cable you need to plug it into your mixer. Should cost you like $15 for the night. Put it on the ground and point it at your head. Make sure the back of the microphone points at the speaker and you will not have feedback problems, provided you are using appropriate microphones (dynamic cardioids like the SM-58) and your PA speakers are pointed at the audience, not the band.
--

Hammond: BC, M3, Split L111, L122 / Leslie: 51, 760 / Yamaha: DGX-620, PF-85

Follow my new band, Dr. Bombay! We're going to be organasmic!
Please use plain text.
Contributor
CleveRocks
Posts: 55
Registered: ‎03-25-2008

Re: Splitting a Mic Signal

Thanks wesg.  Yes this is just an idea for practices, and just to tide me over until I get the IEMs.  Also he does have a couple of floor monitors that I was in front of.  The drummer is quite loud though and it's a basement without much soundproofing on the walls, if any.

Which idea were you saying to use the headphone amp for, the headphones from the mixing board?  Or the separate small PA (with the mic going to 2 places)?   I should have mentioned that my little PA was a powered mixer (amp and mixer in one unit).  Would I need the headphone amp in that case?  It is 150 watt.

 

Please use plain text.
Valued Contributor
RoadRanger
Posts: 9,726
Registered: ‎02-12-2009

Re: Splitting a Mic Signal

Unless you play crowded cities the $175 AS900 works fine.

"We Have Met the Enemy and He is Us" - Walt Kelly

Please use plain text.
Contributor
CleveRocks
Posts: 55
Registered: ‎03-25-2008

Re: Splitting a Mic Signal

Good call.... I just checked that out and it got good reviews on Musician's Friend.   I may just go that route.  Has anyone had a problem with them (Galaxy Audio AS-900 wireless personal monitor system)?

Please use plain text.
Valued Contributor
RoadRanger
Posts: 9,726
Registered: ‎02-12-2009

Re: Splitting a Mic Signal


CleveRocks wrote:

Good call.... I just checked that out and it got good reviews on Musician's Friend.   I may just go that route.  Has anyone had a problem with them (Galaxy Audio AS-900 wireless personal monitor system)?


I've loaned my rack of them out to someone who tried to run them in NYC - only two out of the four were OK . Because they are single frequency if you are getting interference you're screwed - that's why they have those expensive multifrequency ones . They do run in the 600Mhz UHF band so outside of the bigger cities you'll probably be OK. So far I've personally not had any issues, even in a medium sized city like Worcester MA.

"We Have Met the Enemy and He is Us" - Walt Kelly

Please use plain text.
Super Contributor
twostone
Posts: 9,295
Registered: ‎03-06-2005

Re: Splitting a Mic Signal

 Easiest fix is make everybody turn down and tell drummer he's in basement and not on a concert stage so play softer. Which not only would that help to keep from straining your voice but also your ears and the best part of it it's free. 

Please use plain text.