Effects - Pedals, Multi-Effects, and Floor Boxes

[mmolteratx]

Originally Posted by ShortScaleMike

Is that a via under ic3? Can't you avoid that by routing on the blue layer to the right of the ic? (under r21)

There's an error in that revision. But no, there's a trace there.

[Axe_34]

1776 Effects Rub-a-dub reverb using an Accutronics brick. Sounds so good -- lush, room-like.

$9 for the board, $20 for the brick, about $20 in other parts = $50 for stellar reverb!

[openwater]

Just soldered back together an instrument cable my dog chewed the end off of a few years ago. Everything works perfectly. I feel like a master electrician.

[Faldoe]

Originally Posted by Axe_34

1776 Effects Rub-a-dub reverb using an Accutronics brick. Sounds so good -- lush, room-like.

$9 for the board, $20 for the brick, about $20 in other parts = $50 for stellar reverb!

damn you have been on a roll! Whats the voicing like? Springy? I'd like to try and do a Spring Chicken clone some day.

[Axe_34]

Originally Posted by Faldoe

damn you have been on a roll! Whats the voicing like? Springy? I'd like to try and do a Spring Chicken clone some day.

More room than spring.

[Y0UNGBL00D]

got tools for xmas!!! new drill and circ saw. getting me a router and then ill be in business. pedalboards/cabs here i come!

[openwater]

Does anyone out there know of a clone to the Red Witch Emperess chorus?

[WeStartToDrift]

Originally Posted by openwater

Does anyone out there know of a clone to the Red Witch Emperess chorus?

I would doubt there is one.

[Faldoe]

I just placed my first order at Tayda. I had heard of the place but never been there. Its hard not to order tons of stuff with it all being super cheap. $18 shipped and I got plenty of stuff to keep me busy. I went with the standard shipping. Anyone else who uses Tayda find them to be on time with their shipping?

[cryptosonic]

My tayda orders usually come in around two weeks.

[openwater]

Originally Posted by WeStartToDrift

I would doubt there is one.

I figured. I may just buy an Earthquaker Devices Sea Machine.

[openwater]

If I wanted to rehouse my DS-1, I read that a 125b would fit just right in there. However, on mammothelectronics they have pre drilled options and I was wondering what would be the best one for doing the standard Keeley mod? I know it's a little impractical to rehouse it but this would be my first DIY mod and I'd like to rehouse it too and if they have a predrilled version of what would work for the Keeley mod, that would be awesome since I don't really have a means of drilling them myself unless I borrow tools from work. I tried calling them but they are still closed for the holidays I guess.

http://www.mammothelectronics.com/4S125B-p/500-1002.htm



Also here's my design for a Klone my friend is building for me. Hoping to make a Buster themed Superbolt clone next.

[RolloGreb]

Originally Posted by Faldoe

I just placed my first order at Tayda. I had heard of the place but never been there. Its hard not to order tons of stuff with it all being super cheap. $18 shipped and I got plenty of stuff to keep me busy. I went with the standard shipping. Anyone else who uses Tayda find them to be on time with their shipping?

I placed an order from tayda, mouser and futurlec at the same time a few weeks ago. The tayda order arrived early last week and I'm still waiting on the others.

[justhitthebutto]

Hey all. Figured I'd stop lurking and post a few.

[Faldoe]

Originally Posted by RolloGreb

I placed an order from tayda, mouser and futurlec at the same time a few weeks ago. The tayda order arrived early last week and I'm still waiting on the others.

Ahh. Maybe Mouser takes longer for orders to Canada. I usually get my Mouser orders really fast. However the last few Mouser orders have been small, not sure of that matters much.

[lowbrow]

For me, Mouser and Tayada orders take about the same time to arrive. Tayada may take a day or two longer. As an aside, I tried their enclosures for the first time recently and will be switching to them. Excellent value.

[AluminumFalcon]

In love.



Gutsy:

[Faldoe]

sexy!

[ben_allison]

My most recent build: amazing kits from Jeff at Classic API: VP28 preamps and 4 opamps to go with them!

[Axe_34]

Originally Posted by AluminumFalcon

In love.



Gutsy:

Nice! Have you tried the 1776 Effects Multiplex yet? Insanely good circuit.