02-14-2013 04:40 PM
I heard another forum mention that you can try DeOxit on the switch contacts - true? I'm not terribly handy or confident that I can replace the switches myself, and I'm ultimately hoping I don't have to spend another $100 in mods/replacement switches or even buy a new unit. Any suggestions?
02-14-2013 07:19 PM
Dump it, and get a new one... or ask DRASP to do the mod for you
The switches are not real switches, they push down on a contact on a PCB. You might check to se if the piece that pushes on the contact is lined up with the contact
02-14-2013 07:38 PM
Well, it's not that the switches have stopped working, it's actually a different problem. Basically, I only use the DL4 in looper mode, and, when I hit, for instance, the first switch to record, sometimes it will randomly engage another switch, such as the "play once" button, or even trigger the "octave/reverse" switch. It happened spontaneously yesterday and earlier today, but, when I just played for the past hour or so, it was relatively fine. So, I don't know what's going on. . .maybe I'll spend some more time with it and hope that the problem dies down. . .
02-14-2013 11:48 PM
Sounds like its a lost cause to fix 100%... I would say to find someone who is under warranty, and see if you can sneak yours in to get fixed.
02-15-2013 02:54 AM
<a href="http://www.kombiservisiz.net" title="kombi servisi" target="_blank">kombi servisi</a>
<a href="http://demirdokumkombiservisiz.com/" title="demirdöküm kombi servisi" target="_blank">demirdöküm kombi servisi</a>
<a href="http://www.vaillantkombiservisiz.net/" title="vaillant kombi servisi" target="_blank">vaillant kombi servisi</a>
<a href="http://trkombiservisi.com/" title="kombi servisi" target="_blank">kombi servisi</a>
a href="http://klima-servisiniz.net/" title="klima servisi" target="_blank">klima servisi</a>
<a href="http://www.arcelikklima-servisi.net/" title="arçelik klima servisi" target="_blank">arçelik klima servisi</a>
<a href="http://vestel-klimaservisi.net/" title="vestel klima servisi" target="_blank">vestel klima servisi</a>
02-15-2013 11:50 AM - edited 02-15-2013 11:52 AM
it still could be wonky switches and a little board flex switches can bounce when they are crapping out - I can't gaurantee that's the problem, but I've seen that kind of stuff on line 6 gear before
It's a really really easy mod to replace them with panel mount switches if you have basic soldering skills
HarmonyCentral.com is the leading Internet resource for musicians, supplying valuable information from news and product reviews, to classified ads and chat rooms.