09-04-2013 07:33 PM
So I have recenly aquired a peavey TVX 410 4 ohm cab. When I plug it into my 700 watt Firebass head I get absoululy no sound at all. I know its not the amp because It works just fine in my other cab. Ive taken off the back panel and everything seems to be still soldered ok. Ive wiggled things around in hopes I can get any sort of noise, but I cant get any sound at all to come out of it. Am I doing something wrong or is something disconected. I checked all the wires going to the speakers and everything is connected. Any help would be appricated
09-05-2013 05:40 AM
09-05-2013 07:28 PM
The extra electronics are a crossover and L-pad that send only highs to the horn and let you reduce the horn volume.
If it was mine I'd try temporarily bypassing that whole assembly, horn included, to see if the main speakers work. Even if it's just touching the +- wires to the poles of a 9v battery to see if they all move. That will tell you if there is wiring continuity to the speakers and isolate the problem to the jack/board.
HarmonyCentral.com is the leading Internet resource for musicians, supplying valuable information from news and product reviews, to classified ads and chat rooms.